Top 10 best portable vices 2020 – Bestgamingpro

0

Top 10 best portable vices 2020

1. Yost Tools COV-3, 3 ″ (1 Ð ° Ñ ?? k) clamp vise

  • Jaw Width: Three ” x Jaw Opening: 2.1 ” x Throat Depth: 1.57 ”
  • Basic clip-on function works virtually anywhere
  • 30,000 PSI Excessive Strength Castings
  • zero. 25 ″ dx three. 16 € ?? long plated metal screw and process
  • No additional material desired, ready to use the following assembly on the working floor
  • Gripper Power: 660 lbs. and torque rating: 15.5 ft-lbs

2. Fasmov 3 inch universal swivel table vise, 360 ° swivel tilts, universal work

  • Jaws measure three “x three / four” / 79mm x 17mm with a 2 “/ 51mm opening
  • Rubber on jaws can be removed to reveal a cross sample for use on wires / rods
  • Aluminum body
  • Mobile, quickly attaches to the floor
  • Supreme to hold small items in jewelry, interests, mannequin making, electronics and more

3. GROZ 6 Inch Portable Woodworking Vise | Clamp on vice | Cast iron | “Pinching”

  • Fully tighten on the workbench through the clamping slots or use 2-5 / 32â € ?? integrated vice
  • Connect stake liners to protect the vise, workpiece, and processing instruments
  • Lightweight wooden vise for the woodworking enthusiast, yet strong enough for the skilled consumer
  • This mobile wood vise is made from closed grain wrought iron
  • The jaws of the vice are equipped with a “toe” ?? function; when absolutely closed, the jaws meet only at the top to provide uniform clamping over the entire depth of the part

4. Yost LV-4 Home Vise 4-1 / 2 ″ (1 pack)

  • Jaw width: four-1/2 ″ (11.4cm) x jaw opening: three inches (7.6cm) x throat depth: 2.6 ″ (6.6cm)
  • Development of wrought iron at 30,000 psi, end of blue energy coating
  • Screw diameter: zero. 6â € ?? (1.5cm), deal with diameter: zero. 4â € ?? (1cm) x process size 6â € ?? (15. 2cm)
  • Swivel base options (four) mounting tabs
  • Installation hardware not included: (four) three / 8 “bolts? X desk thickness
  • House work shop vise, carpentry, meeting, common maintenance.

5.HENGDA Mini Table Clamp Small Bench Vice New Improved Cast Iron Workmanship Jewelers

  • â Mini desktop bench vise perfect for holding small items in jewelry, interest, mannequin making, electronics, home and workbench.
  • â mini size and mobile, portable use. it can be placed at the edge of any type of desk, the most fixed thickness of 1.2 “(30 mm), quick and easy dismantling;
  • â mini physical vise is made new improved, sturdy and sturdy wrought iron construction ¼Œ a useful miniature vise
  • The vise is sturdy, lightweight, and truly mobile software.
  • Swivel locking clamp for fixing small items, comparable to olives, nuts, bodhi, small Indian stones and various small items, good results attached. Attach any stake block for sanding, grinding, element, drilling, carving, chiseling and more

6. MYTEC Home Vise ,2.5 ″ clamp vise

  • Simple to install: this bench vise can be installed on the stitch of any type of desk. desktop board up to 2.Four inch thick can be clamped. practical and quick to put on and take away;
  • Wide choice of uses: this vise can hold a large number of parts. The o-shaped swivel base allows the vise to rotate up to 360 degrees, even if you are left-handed, you will be able to rotate the vise to the location that matches your job;
  • House vise: Internet weight 3.31 lbs, max jaw opening width 2.5 inch, jaw width 2.0 inch;
  • High Desktop Shield: Throughout installation, there is no need to punch on the desktop, with 2 rubber washers to prevent scratching the desktop and some jaw washers to cover the items (to ensure Proper use of rubber gaskets, please refer to product image before use.First change the fixing chin to larger opening, then install the rubber washer into the corresponding …
  • Suggestions: Please carefully browse our product photos to grasp the scale of each part of the vise before placing an order. we promise you that if you are not satisfied with this product, you can enjoy the refund or change service anytime without any cause. we welcome you to contact us anytime, we will give you a passable resolution.

7. Bessey BVVB vacuum base vice

  • The vise can be rotated 360 degrees and swiveled 90 degrees to position the job optimally without eliminating the tight half of the vise jaws
  • Solid metal elements and matrix for strength
  • Vacuum base mounts to any clean work floor to work where you want
  • Protective jaw caps included to secure the elements without scratching

8. Irwin Tools Drill Press Vise, 4 ″, 226340

  • Textured jaws for a secure grip
  • Lightweight and mobile
  • Slotted base for easy installation and positioning
  • 4.5 inch jaw capacity good for soft bond tasks
  • Cast iron for long-lasting strength

9. IRWIN Wood Vise, 3 inch (226303ZR)

  • Can connect to tables up to 2 “thick
  • Heavy-duty integrated pipe jaws keep the workpiece steady
  • Simple clamping function to work virtually anywhere
  • Anvil shaping horn integrated into the design
  • 2 ″ jaw capacity good for common utility jobs

10. POWERTEC 71016 Vacuum Base Vise – 2-¾⠀ ?? Jaw – Portable – Multidirectional

  • MULTI-DIRECTIONAL: With a common ball head providing 360-degree rotation and 90-degree tilt on any course, you’ll love how easy it is to tackle your challenge, even at the most difficult angles, while still maintaining a grip in efficient hand.
  • Simple maintenance: solid metal parts allow easy cleaning, “v”? grooved jaws can be replaced at will
  • Still, use the locking handle to firmly secure the vise to any non-porous floor. Relaxation assured by understanding that highly efficient suction will hold your challenge in place, minimizing mistakes and errors.
  • Jaw Protection: Rubber jaws protect your challenge from any marks or injuries – ideal for small, detailed jobs.

Share.

Leave A Reply